CPL8100A/B (100A/600kHz)

CPL8100A/B는 최대 100A (70.7Arms)의 DC 및 AC 전류를 모두 측정 할 수있는 전류 프로브입니다.
CPL8100A의 대역폭은 600kHz (-3dB)이고 CPL8100B의 대역폭은 2MHz (-3dB)입니다. CPL8100 시리즈는 10A 및 100A의 두 가지 범위 옵션을 제공하며 사용자는 current value에 따라 올바른 범위를 선택할 수 있습니다. 자동 0점 조절 기능은 사용자가 쉽게 작동 할 수 있도록하며 전원 및 저전압 표시자 및 과부하시 경고음도 제공합니다. 프로브는 배터리 또는 외부 전원 공급 장치로 전원을 공급할 수 있으므로 측정이 훨씬 더 편리해집니다. 표준 BNC 출력 포트를 사용하면 프로브를 모든 오실로스코프에 연결할 수 있으며 BNC-banana plug를 사용하여 멀티미터에 연결할 수도 있습니다. CPL8100 시리즈는 일반적으로 전원 공급 장치, 모터 드라이브 및 전원 공급 장치에 사용됩니다.


Feature :
  • Auto-Zero 기능 및 사용의 편리성
  • 측정 범위(2개), 낮은 전류 측정가능
  • BNC 단자 구비되어 어느 브랜드나 적용 가능
  • Dual Range (1V/A, 0.1V/A)
  • Battery 혹은 AC Adaptor 사용
  • 측정 주파수 2MHz
  • Overload, Buzzer alarm
  • Low battery(<6.5V) indicator
  • Typical battery type and life (9V NEDA 1604A,IEC6LR61, 26h/time)


  • Specfication :
    Range level L H
    Current range 50mA~10A  Peak 1A~100A  Peak
    Attenuation accuracy 0.1V/A 0.01V/A
    Typical DC precision 3%±50mA 500mA~40A Peak :4%±50mA;40A~100A Peak :±15% Maximum
    Band-width
    (-3dB)
    CPL8100A DC-600kHz Refer to the typical Amplitude frequency characteristic (Figure 1)
    CPL8100B DC-2MHz Refer to the typical Amplitude frequency characteristic (Figure 2)
    Max current VS frequency
    characteristics curve
    Figure 3
    Phase shift DC~65Hz:<1.5° DC~65Hz:<1°
    Typical DC linearity The typical DC linearity at H level(0.01V/A), Figure 4
    Rise time CPL8100A ≤583ns
    CPL8100B ≤175ns
    Max operation current Please refer to voltage and current rating table
    Max operation voltage Please refer to voltage and current rating table
    Max floating voltage Please refer to voltage and current rating table
    Operating voltage RMS CATI 600V CATII 600V CATIII 300V
    Common mode voltage RMS CATI 600V CATII 600V CATIII 300V
    Typical battery type and life. 9V alkaline layer-built battery/ 15H
    Low power indication When battery voltage is lower than 6.5V, battery indicator will turned red and alert.
    Overload indication When the current under test surpasses the range, the buzzer will buzz


    PDF Download
    PDF Download
    ===============================================================
     Debug and Analysis Considerations for Optimizing Signal Integrity =================================================================================================